Publications

H. Kim, C.H. Conway, S. Özerinç, S.H. Tawfick, W.P. King, High-Resolution Metrology Enables Data-Driven Prediction of Elastomer Honeycomb Mechanical Properties, Additive Manufacturing Letters, under review.

B. Kaygusuz, A. Motallebzadeh, Ö. Karadayı, K. Kazmanlı, S. Özerinç, Fracture Toughness of AlTiN Coatings Investigated by Nanoindentation and Microcantilever Bending, Thin Solid Films, 140199 (2024).

A.B. Behboud, A. Fadaie, A. Motallebzadeh, S. Şehirli, S. Özerinç, Effect of Nanoheterogeneities on the Fracture Toughness and Tensile Ductility of CuTa Metallic Glass Thin Films, Journal of Alloys and Compounds, 173331 (2024).

C. Okuyucu, T.H. Ulucan, M. Abboud, A. Motallebzadeh, S. Özerinç, İ. Kalay, Y.E. Kalay, Nanomechanical Properties of Al-Tb Marginal Metallic Glass, Materials Science and Engineering: A, 145809 (2023).

M. Kepenekci, B. Gharehpapagh, U. Yaman, S. Özerinç, Mechanical Performance of Carbon Fiber-Reinforced Polymer Cellular Structures Manufactured via Material Extrusion, Polymer Composites, 44, 4654–4668 (2023).

E. Sonat, M. Bakır, S. Özerinç, Failure Behavior of On-Site Repaired CFRP Laminates, Composite Structures, 311, 116806 (2023).

A. Alduais, S. Özerinç, Tunable Mechanical Properties of Thermoplastic Foams Produced by Additive Manufacturing, Express Polymer Letters, 17, 317-333 (2023).

S.E Kim, N. Verma, S. Özerinç, S. Jana, S. Das, P. Bellon, R.S. Averback, Strengthening of Nanocrystalline Al by Grain Boundary Doping: Effects of thermal annealing and ion irradiation, Materialia, 26, 101564 (2022).

A. Behboud, A. Motallebzadeh, S. Özerinç, Nanostructured ZrTa Metallic Glass Thin Films with High Strength and Toughness, Journal of Alloys and Compounds, 901, 163578 (2022).

B. Nigar, S. Dönmez, D. Çöker, S. Özerinç, Understanding Mechanical Failure of Graphite Rocket Nozzle Throats under Thermal Stresses, Aerospace Science and Technology, 119, 107152 (2021).

S. Özerinç, B. Kaygusuz, M. Kaş, A. Motallebzadeh, Ş. Nesli, Ö. Duygulu, O. Yılmaz, Micromechanical Characterization of Additively Manufactured Ti–6Al–4V Parts Produced by Electron Beam Melting, JOM, 73 3021–3033 (2021).

M. Abboud, A. Motallebzadeh, Ö. Duygulu, R. Maaß, S. Özerinç, Microstructure and Nanomechanical Behavior of Sputtered CuNb Thin Films, Intermetallics, 136, 107249 (2021).

A. Bakır, R. Atik, S. Özerinç, Mechanical Properties of Thermoplastic Parts Produced by Fused Deposition Modeling: A Review, Rapid Prototyping Journal, 27, 537–561 (2021).

E. Sonat, S. Özerinç, Failure Behavior of Scarf-Bonded Woven Fabric CFRP Laminates, Composite Structures, 258, 113205 (2021).

A. Bakır, R. Atik, S. Özerinç, Effect of fused deposition modeling process parameters on the mechanical properties of recycled PET parts, Journal of Applied Polymer Science, 138, 49709 (2021).

S. Hasçelik, Ö.T. Öztürk, S. Özerinç, Mechanical Properties of Nylon Parts Produced by Fused Deposition Modeling, International Journal of Modern Manufacturing Technologies, Vol. XIII, 34-38 (2021).

B. Kaygusuz, S. Özerinç, Improving the ductility of PLA parts produced by fused deposition modeling through PHA additions, Journal of Applied Polymer Science, 136, 48154 (2019).

M. Abboud, S. Özerinç, Size independent strength of amorphous – HCP crystalline metallic nanolayers, Journal of Materials Research, 34, 2275-2284 (2019).

S. Özerinç, Experimental measurements of interfacial strength at the nanoscale, Journal of the Faculty of Engineering and Architecture of Gazi University, 34, 1645-1652 (2019).

J. Pikul, S. Özerinç, B. Liu, R. Zhang, P. Braun, V. Deshpande, W.P. King, High strength metallic wood from nanostructured nickel inverse opal materials, Scientific Reports, 9, 719 (2019).

F. Sıkan, S.E. Atabay, A. Motallebzadeh, S. Özerinç, İ. Kalay, E. Kalay; Effect of Sm on Thermal and Mechanical Properties of Cu-Zr-Al Bulk Metallic Glasses, Materials Science & Engineering A, 743, 168-174 (2019).

M. Abboud, A. Motallebzadeh, N. Verma, S. Özerinç, Nanoscratch behavior of metallic glass-crystalline nanolayered composites, JOM, 71, 593–601 (2019).

S. Özerinç, Finite element analysis of nanoindentation on nanolaminated materials, Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, 19, 991-1000 (2018).

B. Kaygusuz, S. Özerinç, Investigation of the mechanical properties of 3D printed PLA-based structures, MATİM Journal, 16, 1-6 (2018).

S. Özerinç, R.S. Averback, W.P. King, In situ Measurements of Irradiation-Induced Creep of Nanocrystalline Copper at Elevated Temperatures, JOM, 68, 2737-2741 (2016).

S. Özerinç, H.J. Kim, R.S. Averback, W.P. King, Direct measurements of irradiation-induced creep in micropillars of amorphous Cu56Ti38Ag6, Zr52Ni48, Si and SiO2, Journal of Applied Physics, 117, 024310 (2015).

S. Mao, S. Özerinç, W.P. King, R.S. Averback, S.J. Dillon, Effect of irradiation damage on the shear strength of Cu-Nb interfaces, Scripta Materialia 90-91, 29-32 (2014).

S. Özerinç, R.S. Averback, W.P. King, In situ creep measurements on micropillar samples during heavy ion irradiation, Journal of Nuclear Materials 451, 104-110 (2014).

S. Özerinç, K. Tai, N.Q. Vo, P. Bellon, R.S. Averback, W.P. King, Grain boundary doping strengthens nanocrystalline copper alloys, Scripta Materialia 67, 720-723 (2012).

S. Özerinç, A.G. Yazıcıoğlu, S. Kakaç, Numerical analysis of laminar forced convection with temperature-dependent thermal conductivity of nanofluids and thermal dispersion, International Journal of Thermal Sciences 62, 138–148 (2012).

S. Özerinç, S. Kakaç, A.G. Yazıcıoğlu, Enhanced thermal conductivity of nanofluids: A state-of-the-art review, Microfluidics and Nanofluidics 8, 145-170 (2010).